T series-spiral bevel gear reducer

Product overview of T series spiral bevel gear reducer:
1. Chassis: Cast iron with high rigidity FC-25;
2. Gear: Made of high-quality and high-purity alloy steel 50CrMnT quenched and tempered, carburized, quenched and ground;
3. Main shaft: It is made of high-quality and high-purity alloy steel 40Cr quenched and tempered, and has the ability to suspend heavy loads.
4. Bearings: equipped with cone roller bearings with heavy load capacity;
5. Oil seal: Imported double lip oil seal is used, which has extremely high dust and oil leakage resistance.

Product lubrication:
The proper use of lubricating oil for the T series spiral bevel gear steering box can exert the efficiency of the steering gear and increase its operating life.
1. The reducer is initially used for two weeks or 100-200 hours, which is the initial wear period. There may be a little metal abrasion particles during this period. Please be sure to clean the inside and replace with new lubricating oil;
2. For long-term use, replace the lubricating oil every six months to a year or 1000-2000 hours.

technical parameter:
Power: 0.18KW～96KW
Torque: up to 985N.m; can be equipped with single horizontal axis, double horizontal axis, single vertical axis, double vertical axis
速比：1：1、1.5：1、2：1、2.5：1、3：1、4：1、5：1

Product number:
T2、T4、T6、T7、T8、T10、T12、T16、T20、T25