How to solve the failure during the use of the worm gear screw elevator

 How to solve the problem during the use of the worm gear screw elevator?I believe that many people will have various problems in the process of using the worm gear screw elevator to lift and drive. Most people don’t know how to deal with the problem. Below, the editor has collected and sorted out some of the faults in use. Take a good look, everyone. Next, prescribe the right medicine.

1. Causes and solutions for the shaking of worm gear screw elevators during normal use:

The reasons for the vibration of the screw elevator after the additional load during use are the uneven pitch of the screw, the uneven worm split, the quality of the flat pressure bearing and the taper bearing, the upper and lower sheaths of the screw are too tightly matched, and the installation Questions of disagreement.

2. Reasons and treatment methods of noise during the use of the screw lift:

The reason for the noise during the operation of the worm gear screw elevator is that the split ends of the multi-head worm of the fast screw elevator are uneven, and the reason for the slow noise is the quality of the bearing.

 3. Reasons and treatment methods of excessive temperature rise and jamming of the screw elevator:

The high temperature of the screw elevator under normal working conditions should not exceed 45 degrees Celsius. If high temperature occurs, the machine should be immediately stopped for inspection. Generally, the reason for this problem is that the screw elevator of this tonnage is too small and overloaded, or the worm and worm gear end cover In line with the high temperature situation caused by over-tightening, the input speed is not excluded from the external worm gear screw elevator. The high speed of the worm shaft of the worm gear screw elevator should not exceed 1000min/s. If the input speed is too high, it will be high and stuck. , The treatment method of high temperature is to reduce the input speed, check whether the embedding fit of the gland is too tight and whether the screw elevator is out of oil.

The load-bearing capacity of the screw elevator is 2.5 tons-120 tons. The product features of the screw elevator are small size, light weight, convenient installation, multiple forms of support, high reliability, long service life, and many other advantages. The screw elevator has the advantages of lifting, lowering, pushing, and turning , Stretching, etc. The worm gear screw lift can be used by a single unit or a combination of multiple units. It can be lifted and propelled according to a certain program and can be manually or electrically driven.The maximum lifting speed of the screw lift is 2.7m/min, and the screw lift has the advantage of self-locking.