How does the motor disconnect the power supply through the reduction gear

 According to the actual situation, how does the motor disconnect the power supply through the reduction gear?Motors with similar power are actually relatively similar in size, but you have to figure out what are the limits of DC or AC at the input?Single-phase or three-phase?Then on this basis, the frequency conversion saves power, but the starting torque is small. The fixed frequency consumes electricity but the torque is large and fluctuates. The meeting suddenly broke out. Whether it is mechanical or electrical, the high speed is longer and the twist is thick. The stepping or servo is based on your spatial arrangement.At this time, you can filter out a lot.

Gear transmission form: The motor drives the small screw rod installed in the inner tube through the reduction gear, and drives the nut connected with it to make an axial running nut. When it reaches the set stroke, the contact angle of the nut presses the limit switch to disconnect the power supply. Resting movement (the reverse is the same).Among them, the direction of the motor and the telescopic rod of the DTZ is vertical, and the installation method of the worm gear transmission structure is adopted.The direction of the DTP motor and the telescopic rod is parallel, and the installation method of the gear transmission structure is adopted.