Matters needing attention in the use of worm gear reducer

 Many people may not be very clear about the matters needing attention in the use of worm gear reducers. Today, the editor specially collected articles on the use of worm gear reducers to introduce in detail the points that users should pay attention to during use.

Precautions for the use of worm gear reducer

Unlike other gear transmissions, a considerable part of the turbine and worm in the worm gear reducer transmits torque by friction (most of other gear transmissions rely on tooth profile meshing), so the heat is greater.In this way, the lubrication of the reducer is very important, so be careful not to run out of oil when using it.

1. It is strictly forbidden to knock:

When installing couplings, pulleys, sprocket and other coupling elements on the output shaft of the reducer, direct hammering is not allowed for operation.Because the output shaft structure of the reducer cannot withstand axial hammering, the screw hole can be screwed into the shaft end to press into the coupling.

2. Be sure to install a breather cap (that is, an exhaust screw plug):

When using the reducer, be sure to replace the plug on the top of the reducer with an exhaust screw plug. The function of replacing the exhaust screw plug is to ensure that the reducer is working to remove the gas generated in the inner body of the reducer.Otherwise, when the reducer is working for a long time, the gas in the reducer will adhere to the longer the working time and increase, and the temperature rise will cause the oil seal of the reducer to swell and damage, causing the reducer to leak oil.

3. Replacement of lubricating oil:

The user determines the amount of lubricating oil to be injected according to the size of the reducer. There are specific regulations for this, and the specific operation should follow the reducer's manual.If the reducer is used in a working environment with harsh environment, high temperature, and large dust, please be sure to check or replace the lubricating oil every 12 days.

The above are some precautions that the editor wants to share with you about the use of worm gear reducers, hoping to help you better and more standardized use of worm gear reducers.