Basic structure diagram and brief introduction of MB continuously variable transmission

MBStepless speed changerThe basic structure diagram has 15 aspects: 1. Output shaft 2. Planet carrier 3, fixed cam 4, steel ball 5, slider bearing 6, speed control handle 7, speed control screw 8, speed control slider 9, adjustment Speed ​​cam 10, planetary gear 11, fixed ring 12, sun gear 13, pressure plate 14, disc spring 15, input shaft

Basic structure:


General introduction:
XNUMX. Structural features
    The speed adjustment accuracy is high, and the speed repeatability can reach 0.5-1 revolutions.
    It can operate continuously in both directions.
    The output transmission ratio is continuously adjustable between 1:1.4-1.7, and the speed ratio is up to 5.
    High operating efficiency, stable noise suppression.
    Good airtightness and strong adaptability to the use environment.
    It can be flexibly combined with various reducers to solve various transmission and speed changing schemes.

XNUMX. Main materials
    Shell: MB02-MB07 is aluminum alloy, MB15-MB75 is cast iron.
    Internal parts: GCr15 steel that is heat treated and hardened.
    Shaft: 45# steel hardened by heat treatment and tempered at low temperature.

Three, paint
    Aluminum alloy: After the surface is shot blasted, it is treated with anticorrosion and then painted.
    Cast iron: spray baking paint.

Four, matching motor
    Aluminum shell motor, IP54/55, B5 mounting flange.